How to Repair the Stopper in a bathroom Sink

How To Repair The Stopper In A Bathroom Sink

When the handle on your bathroom sink breaks, it’s not fun. You need to get to the source of the problem and fix it as soon as possible. Luckily, there are a few steps you can take to make sure that the problem doesn’t happen again. Now We tell you how to repair the stopper in a bathroom sink?

If your kitchen sink has stopped up because of a clog, you might need to get a bit creative in order to unclog it fast. Or you might even have a completely blocked sink that won’t drain at all. Maybe the clog is inside the pipe, or the pipes themselves are frozen. Whatever the case, you need to unclog your sink as soon as possible. It’s not pleasant to stand over a broken pipe, let alone try to fix it yourself.

Fortunately, there are a few things you can do to make sure that the broken stopper doesn’t happen again. Keep reading to learn more about how to repair the stopper in a bathroom sink.

Table Of Content

  • What You Need To Repair A Stopper In A Bathroom Sink
  • Pick Your Replacement Plunger/Stopper Based On Your Sink Type
  • Remove Everything From Under The Sink
  • Remove The Stopper
  • Fix The Broken Arm That Is Attached To The Pop-Up Drain
  • Clean Up Any Messes From Pouring The Plunger
  • Test To See If It Works!
  • Reattach The Chain That Pulls The Pop-Up Drain
  • Put Everything Back Together
  • Bonus Tips!
  • Final Thought

What You Need To Repair A Stopper In A Bathroom Sink

What You Need To Repair A Stopper In A Bathroom Sink

If your kitchen sink has stopped up because of a clog, you might need to get a bit creative in order to unclog it fast. Or you might even have a completely blocked sink that won’t drain at all. Maybe the clog is inside the pipe, or the pipes themselves are frozen. Whatever the case, you need to unclog your sink as soon as possible. It’s not pleasant to stand over a broken pipe, let alone try to fix it yourself.

Fortunately, there are a few things you can do to make sure that the broken stopper doesn’t happen again. Keep reading to learn more about how to repair the stopper in a bathroom sink.

Pick Your Replacement Plunger/Stopper Based On Your Sink Type

If your sink has a plunger, you might want to replace the plunger as soon as possible. If your sink doesn’t have a plunger, you might need to get creative in order to unclog it fast. You can use a plunger to push and pull at the pipes, but make sure you are using the correct plunger for your type of sink. For example, if you have a kitchen sink with a Lever type plunger, you should use the Lever type plunger. If you have a bathroom sink with a Push type plunger, you should use the Push type plunger.

Remove Everything From Under The Sink

Remove Everything From Under The Sink For Repair The Stopper In A Bathroom Sink

One of the most important things you can do when trying to unclog a bathroom sink is to remove everything from under the sink. This will help free up space and make it easier to try to fix the stopper. If there are any cords or devices plugged into the sink, they need to be unplugged as well.

Remove The Stopper

Remove The Sink Stopper For Repair The Stopper In A Bathroom Sink

Once you know the cause of the sink stoppage, the first step is to remove the stopper. You’ll need a plunger and some water. Place the plunger over the broken stopper and push and pull until it comes out. Be careful not to break the stopper, or you’ll have to start from scratch.

If your sink has been frozen for a while, there may be a more creative solution. If it’s not frozen, you can try using a plunger and boiling water. Boil some water and pour it over the broken stopper. Push and pull until the clog is gone.

Fix The Broken Arm That Is Attached To The Pop-Up Drain

Fix The Broken Arm That Is Attached To The Pop-Up Drain

The first step is to remove the old stopper and replace it with a new one. This might seem like a lot of work, but it will save you a lot of time in the long run.

Once you have replaced the stopper, you’ll need to clean the area where it was attached to the pop-up drain. This will help to keep the sink clean and free from clogs.

If you still can’t get your sink to drain, it might be because there is something blocking the pipes or because there is something lodged in the pipes themselves. In that case, you’ll need to call a plumber in order to unblock the pipes and fix the situation permanently.

Clean Up Any Messes From Pouring The Plunger

Clean Up Any Messes From Pouring The Plunger

If you pour the plunger too quickly, you might create a mess. This is because the plunger is powerful and can push anything that gets in its way. If there are any messes or obstacles in your way of getting to the plunger, you’ll have a harder time pushing the plunger all the way down.

Test To See If It Works!

Before you even try to fix the stopper, it’s important to test the Stopper for Failure. This is a simple test that you can do in your own home. Pour a pot of water into the sink and turn on the faucet. If the stopper doesn’t come off when you turn on the faucet, then it probably won’t work when you fix the problem.

Reattach The Chain That Pulls The Pop-Up Drain

If you can’t get the stopper off, you’ll first need to detach the chain that pulls the pop-up drain. This will enable you to remove the drain without having to fumble around in a pile of broken parts.

Once you have detached the chain, you’ll need to remove the stopper from the drain. This is done by unscrewing it from the top of the drain. Once it’s off, you’ll need to pull it out of the sink. Be careful not to damage any of the pipes or fittings in your bathroom. Once you’ve removed all of the parts, you’ll need to put them back together again and reattach the chain.

Put Everything Back Together

If you can, try to put everything back together as soon as possible. This will help you avoid any further damage and make sure that the sink is repaired properly.

If you can’t do this, it’s important to have someone else fix the sink for you. A professional will be able to fix the stopper and ensure that the sink functions properly again.

  • Remove the stopper from the sink.
  • Take the lever off of the stopper.
  • Cut off the old stopper with a sharp knife.
  • Put everything back together and start your bathroom sink again.

Bonus Tips!

  • Pour a pot of boiling water on the broken stopper and let it sit for a few minutes to help loosen the pipe.
  • Use a plunger to push and pull the blockage out of the sink.
  • Use a plunger to suction onto the top of the blockage and pull until it pops out.

Final Thought

If your stopper has started to fall off, the first thing you should do is to take it to a mechanic. In most cases, a broken stopper can be fixed with a few simple steps. First, remove the stopper from the sink by gently pushing it out from the bottom. Next, cut off the old Stopper by using a sharp knife. Once the old Stopper is cut off, replace it with the new Stopper. Finally, reattach the handle of the sink so that it is properly in place. For bedroom door, How To Unlock A Bedroom Door?

About The Author

Scroll to Top